Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateHVAC Company in Kirby, TX
Halden Heating & Air is the HVAC company Kirby homeowners call when a 1970s condenser gives out during a 102°F afternoon and the indoor temp is climbing past 82. We repair, install, and maintain heating and cooling systems across Kirby, TX, with written pricing before any work starts and a live arrival time you can track to your door. Kirby’s older housing stock and brutal summer heat mean most of our calls here are AC repairs on aging, often mismatched systems. Call (903) 623-6784 and a real person answers, 24/7.
Why Kirby Homes Are Different
Kirby’s residential streets are mostly mid-century single-family homes built between the 1950s and 1970s, and that age shows up in every service call. Slab-on-grade foundations mean ductwork runs through hot attics with minimal insulation, so cooled air loses several degrees before it reaches the bedrooms. Many Kirby homes still have their original 1970s-era electric furnaces paired with newer outdoor condensers, a mismatch that strains compressors and makes indoor temps hard to hold below 80°F on triple-digit days. The water here is hard, too, which shortens the life of evaporator coils and drain lines. From May through September, systems in Kirby run nearly nonstop, and that continuous load is exactly when capacitors, contactors, and compressors fail. A technician who knows Kirby expects these patterns and checks for them before recommending a fix.
Styles & brands we work with
Our Main Kirby Services
Kirby homeowners call us most for two things: getting a struggling AC through another South Texas summer, and replacing a system that has finally reached the end of its useful life. Below are the three services we offer in Kirby, each with its own dedicated page.
AC Repair in Kirby
Most AC repairs in Kirby come down to heat and age. When a unit runs continuously from May through September, capacitors and contactors wear out faster than they would in a milder climate, and older condensers often lose refrigerant through pinhole leaks in the coil. Halden Heating & Air technicians arrive with a live arrival time and common parts stocked on the truck, so many Kirby repair calls are resolved on the first visit. Every repair includes a written price before work begins and a written guarantee afterward. AC Repair in Kirby
AC Installation in Kirby
Replacing an AC in Kirby usually means matching a new outdoor condenser to a home’s existing ductwork and, often, its original electric furnace. Many Kirby homes have undersized or mismatched components, so a proper installation starts with a load calculation rather than a one-size-fits-all swap. Andre Fuller and the Halden team size every system to the home’s square footage, insulation level, and duct condition. Homeowners get a fixed written price and a set install date before any equipment is ordered. AC Installation in Kirby
Furnace Repair in Kirby
Kirby winters are short, but the first cold snap of the year always exposes furnaces that have sat idle since March. Many Kirby homes still run on the original 1970s-era electric furnaces, and those units develop loose connections, failing sequencers, and blower motor issues after decades of use. Halden Heating & Air repairs all major furnace types and brands, with a written price confirmed before any work starts and a written guarantee on every completed repair. Furnace Repair in Kirby
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kirby
We service and install Rheem, York, and Bryant equipment, along with Carrier, Trane, Lennox, Goodman, Daikin, and American Standard. Our trucks carry common parts for these brands, so most Kirby repair calls are finished in one visit. Our brands page lists everything we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for HVAC Company in Kirby, TX
| Service | Typical range in Kirby |
|---|---|
| AC repair (minor: capacitor, contactor) | $150 – $350 |
| AC repair (major: compressor, coil) | $400 – $650 |
| Furnace repair (minor: ignitor, flame sensor) | $150 – $300 |
| Furnace repair (major: blower motor, heat exchanger) | $400 – $700 |
| AC installation (basic single-stage, smaller home) | $3,500 – $5,000 |
| AC installation (high-efficiency, larger home) | $5,000 – $7,500 |
| Full system tune-up | $80 – $200 |
In Kirby, prices tend to push toward the higher end when a home still has original ductwork or a mismatched furnace that complicates the install. Whatever the job, Halden Heating & Air gives you a written price before any work begins, and that number does not change at the door.
Neighborhoods We Serve in Kirby
We cover every neighborhood in Kirby, from the older streets north of Binz-Engleman up to the newer pockets near Ackerman. Most of our Kirby calls get a same-day or next-day response, and you can track your technician’s live arrival time from the moment the appointment is booked.
- Kirby city center and surrounding residential streets
- Homes near Binz-Engleman Road
- The neighborhoods off Ackerman Road
- Streets just south of the I-10 corridor
- All Kirby addresses within the 78219 ZIP
Service Area – Cities Near Kirby
Halden Heating & Air serves Kirby and the surrounding Bexar County area, with dispatch coordinated from our San Antonio office and crews serving Kirby locally. We also provide HVAC service in San Antonio, TX, Universal City, TX, Timberwood Park, TX, and Leon Valley, TX.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About HVAC Company in Kirby
Most Kirby calls get a same-day or next-day appointment, and emergency AC calls during heat waves are prioritized. When you book, you get a live arrival time and can track your technician to the door, not a four-hour window. Call (903) 623-6784 and we’ll tell you exactly when we’ll be there.
Yes, most AC and furnace replacements in Kirby require a city permit, and the installing contractor is responsible for pulling it. Halden Heating & Air handles the permit paperwork and inspection scheduling as part of every installation, so you don’t have to deal with the city office.
We serve every address in Kirby, including the older 1950s and 1960s neighborhoods, homes near Binz-Engleman, and newer streets off Ackerman. If you’re in the 78219 ZIP, you’re in our service area. Call (903) 623-6784 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local hvac pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirby Customers Say
"AC died and I booked the same day. Tech texted a photo and name. Replaced a capacitor and the house cooled fast."
- Mei L."No phone tag. Just texts, and it worked. Booking, the ETA, and the receipt were all in one thread on my phone."
- Jon P."New AC install. Quotes arrived in the app with three options. Install was done in a day."
- Tonya S.